I made this Easter card for my sister and her husband. The egg is from Cricut’s Designer’s Calendar (under Events Shift). It has pretty lines and cut-outs that can be embellished with a white gel pen and glitter glue. To get the card base, I chose two eggs at 6.5 inches in Design Studio, hid the contour lines, and welded them together. Then I cut a regular egg with all of its lines and cut outs at 6 inches for the top of the card.
For the inside of the card, I used two 6 inch eggs, hiding the contour lines, to serve as card liners. It helped beef up the base and allowed for an area to write a message under the sentiment. The sentiment is cut from Wild Card at 6 inches using Colorbök’s white cardstock. The light blue and green cardstock is from Wal-mart (pastels).
I highlighted the cut swirls with a white gel pen and used Stardust Stickles on the cut-outs. I made a scalloped envelope from Wild Card (not pictured) cut at 5 inches which gives you a 5×7 envelope to fit this card.
Are you in shock? It’s me, I promise. I’ve been MIA lately but never too far from the craft room. I did some cleaning and reorganizing but I’ve kept a low profile because I didn’t have any paper crafts to share until tonight. I finally got back in the craft room to get re-energized and to remind myself how much I do enjoy making cards. I made this little Easter card using my new Fancy Frames cartridge that hubby got me this month just because. 🙂 I wonder if he was secretly trying to aid me in creating again. I still have so many other goodies to delve into from Christmas and my birthday but I decided to take it slow as I got reacquainted with my Cricut machine. The last time I used it was in December! Well, enough of me trying to explain where I’ve been and why I haven’t been on here lately. I don’t really know why myself, but I have missed blogging, crafting, and reaching out to all my blog pals!
This simple Easter card is A2 (4.25 inches by 5.5 inches). I used Design Studio to scale the light green Fancy Frames image to 4 inches by 5.25 inches. I cut the corresponding background mat in pink at the same size. The bunny rabbit is cut at 3.75 inches from Four Legged Friends. I used Stardust Stickles on its belly, a pom-pom for the tail, and squiggly eyes for some whimsy. Each carrot (front and inside of the card) is cut from Just Because Cards at 3 inches.
I stamped “for you” on the front carrot using Fiskars “All Year Greetings”. I love this little stamp! I added a small bow of twine to the carrot as if it was a gift from the bunny. 🙂 The Happy Easter stamp on the inside is from Stampabilities.
Most of the paper used is from Colorbök (I recently learned it’s pronounced as color book, not color bock! I love getting their solid colored cardstock pads at Wal-mart for $5. They cut cleanly and have a nice linen texture.
Thanks for checking out my wee little card. It’s simple, but I’m taking my journey back into paper crafting nice and slow! 😉
This project channels memories of a fun Easter craft my 5th grade class completed so many years ago: papier-mache Easter egg baskets. I wanted to come up with a cute project to share with my husband as we celebrate Easter this Sunday and I thought of this “too long forgotten” idea. I also made a third one to share with family. Since it has been many years since I made this craft, I found some articles that helped me find a good glue paste ratio and other helpful tips. These lovely articles can be found near the bottom of this post. As we get closer to Easter, I will make dyed Easter eggs to go in the basket of treats.
- tissue paper
- Elmer’s glue (4 ounce bottle)
- water (4 ounces)
- foam brush
- Tupperware bowl with lid
- newspaper (to protect your work surface)
- small glass bowl to hold your balloon
- X-Acto craft knife
- Easter grass or shredded paper
- small toys
- die-cut flowers
- small brads
- hot glue
- Cut tissue paper into squares such as 2×2 or 3×3 inches. Since I made three balloons, I cut four sheets of white for the first layer, then two sheets of blue, pink, and purple for the second and third layers.
- Pour a four-ounce bottle of Elmer’s glue into a Tupperware bowl (with lid). Add a 1/2 cup of water (four ounces) and thoroughly mix to create a 50/50 diluted glue paste.
- Blow up your balloon to desired size and tie off the end in a knot.
- Using a foam brush, coat a small section of the balloon with the glue paste.
- Apply a square of tissue paper and then coat with more glue paste using your foam brush. (For my first layer, I chose to apply a white tissue layer for the entire balloon creating a white liner.)
- Apply more glue to a small section of the balloon, add another square of tissue paper, overlapping as you go for added strength, and then coat with more glue.
- Repeat this process until the balloon is covered with the first layer of tissue paper.
- Hang to dry for at least an hour. (I used binder clips to attach them to a curtain! String or clothes pins will work great too.) While you wait, snap on the lid to your glue paste container to keep it usable for the next two layers.
- Once the first layer is dry, repeat the tissue paper application process for your second layer. (I used blue, pink, and purple for the second layers of my three balloons).
- Once again, hang to dry for at least an hour and then repeat the application process for your third layer. (I kept my eggs solid-looking by adding more blue, pink, and purple).
- Hang to dry overnight.
- Grabbing the balloon’s knotted end, insert a needle into the knot to slowly deflate the balloon and pull out the balloon remnant. (See tip #6 below for how I ended up doing it).
- Use scissors and/or an X-Acto craft knife to cut out a basket opening. (I personally don’t trust my hand cutting skills, so I used an egg shape (measuring 4 x 5.75 inches) from the Designer’s Calendar cartridge. I then traced this template onto the papier mache egg with a pencil before cutting out the opening).
- Using your left over glue paste, apply a couple of layers of tissue paper over the small hole left from the balloon knot.
- Add decorations to the basket as desired. I chose die-cut flowers with small brads and hot glued them along the opening. I used Cricut’s Mother’s Day Bouquet cartridge for the flowers and leaves.
- Now for the fun part! Add Easter grass, candy, dyed eggs, and a small toy!
Tips I learned while completing this project:
- When applying your tissue paper, cover the edges of the knotted balloon area as close as you can. This will leave you with a smaller hole to cover once the balloon and its knot are removed.
- Using a Tupperware bowl with lid is an excellent idea to keep your paste from firming up too much or drying out while waiting for each layer to dry. I got this idea from Pastiche’s article at Zujava (first link below). She also suggested using a foam brush to apply the glue paste and it worked perfectly!
- I found it helpful to prop up my balloon using a small glass mixing bowl while I added the tissue paper layers. It also keeps it protected from the newsprint covering your work table.
- Luckily, the four-ounce bottle of Elmer’s glue was exactly enough to finish three balloons. If you’re doing just one or two balloons, you should have plenty of glue paste left over.
- It doesn’t matter what color balloon you use to cover with tissue paper since the balloon will be discarded in the end.
- I found the needle deflation to be too slow, so I used a pair of scissors to cut a small hole. The balloon tended to stick to the paper layer as it deflated and caused some sides to cave in. Not to worry! Once you pull out the balloon, you can blow air into the remaining hole (like you would with a plastic soda bottle) and pop the sides back out!
- Three layers of tissue paper creates a fragile egg but if treated with care, it should make for a nice Easter treat presentation and can be stored in a box to protect it for future use.
- Before adding the grass and treats, the fragile empty egg wanted to roll over onto its back. Once I added in my treats, the added weight kept the egg propped up and actually created an indentation in the bottom paper wall. (Updated remark: after Easter passed and the treats were all gone, the indentation left in the bottom of the egg kept it propped up even while empty, so I won’t have to create feet or a base to prop it up for future decor).
- I read that if you want a truer egg shape, yet a bit smaller, then a water balloon is a good choice. I used regular balloons that could be blown up to a larger size which is a personal preference.
- The first two links below offer nice alternatives to the egg basket design. They made smaller papier-mache eggs filled with goodies. One has a hinged lid; the other has a string you can pull to open the egg to see the surprises inside. The third link shows a design similar to mine, yet it is a literal Easter basket that can be carried around for egg hunting. It has a corded handle and even feet to prop the egg up! She used newspaper, tissue paper, and paint on the inside of her baskets. The last link is by Martha Stewart designers and shows how you can cut the tops of the eggs with an X-Acto knife for a cracked egg look.
Here are pictures of four Easter cards I made for my extended family. I made two in pink and two in light blue using Cricut’s Walk in My Garden cartridge. I also used the Camp Out cartridge for the bunny shape (cut at 2 3/8 inches using Design Studio) and the Wild Card Cartridge for the sun shape (image is actually an icon for the Porthole card on page 55 of the Wild Card manual) but when cut twice in orange and yellow paper it makes a nice sun graphic. The “sun” was cut at 4 inches. The Easter ribbon was purchased from Hobby Lobby on clearance for 59 cents and it was just enough to make my four cards. The card base is cut from WIMG at 5 inches (card2 on page 129) and then I used a corner rounder punch to round all corners of the card. The tulips are from WIMG’s border feature and cut at 2 inches (page 99). I am particularly proud of my grass graphic. I scoured my cartridges for a grass image and the only one available to me was the grass border from WIMG which I used on a previously posted turtle card and hello card (Walk in My Garden ~ Cards for Spring post). I wanted more of a grassy hill look for my Easter card so I decided to use a graphic in a new way. On page 105 of the WIMG cartridge manual, there is a seed packet border image (seed packets on top of dirt mounds). I used Design Studio and selected the “hide selected contour” feature to hide the seed packets and other markings in the dirt. Here’s how this feature works: left-click on the line you want to omit from cutting (this changes it from black to red). While it’s still selected, right-click and choose “hide selected contour” and the red line changes to pink. Next, deselect the image altogether and watch it change to light blue (this means anything in light blue will not cut). Once I hid these unwanted lines, I was left with an image that resembled grass when cut in green paper. I played with different sizes and noticed that a cut of this image at 2 inches made a good width for my 5 inch card base. I then stretched the graphic downward just a bit to widen the look of the grass.
To give the card some needed dimension, I used my Sizzix Embossing machine and two Cuttlebug folders to add texture to the sun and the grass. The first pink card I made was my “beta” test and I had already adhered the grass before I made the decision to run the other cards’ grass through the embosser. At least you can see how it looks with and without embossing. The sun was run through the Swiss Dots Cuttlebug folder. The grass was run through the Stylized Flowers Cuttlebug folder.
Hope you like the cards. I had a lot of fun making them and have heard from my family how much they loved them!