Set of Mother’s Day Cards

I made Mother’s Day Cards for my dear Mother and Mother-in-law. The first one I want to share is the hummingbird card I made for my Mom. She loves hummingbirds so I made her this inspired card using the Cricut Pagoda and Tags, Bags, Boxes, & More 2 (TBBM2) cartridges.

Hummingbird Card - Pagoda, TBBM2

Last weekend, I found DCWV’s Nana’s Kitchen Stack at Michael’s on sale for $4.99. I used the pretty floral paper for the card and envelope (TBBM2 page 34 card, page 35 envelope). The card originally has small circles that cut out on the the card’s spine but I hid these in Design Studio (DS). The scalloped card base is cut at 4.5 inches from TBBM2. I cut a second card base in light blue cardstock to serve as a liner and adhered it inside the card. I must not have scored the liner perfectly centered to match the floral card base because it sticks out on the front but the two layered scalloped edge is a happy accident.

Card and Envelope - TBBM2

I used Accent Essentials to cut out the two circles on the front of the card (3 and 4 inches) and one more 4 inch circle for the inside message. The leaves are made from two Martha Stewart punches – Frond and Vine Trim. The hummingbird is cut from the Pagoda cartridge at 3 inches. I added Distressed Clear Rock Candy on the hummingbird and Stardust Stickles on the wing. The flower layers are from the dollar bin at Michael’s and the button brad is from American Craft’s Crate Paper “On Trend” line. I used Cuttlebug folders on the circles on the front of the card – Swiss Dots and D’vine Swirls. The “MOM” alpha stickers at the bottom right of the card face are from Dear Lizzy 5th & Frolic.

Mother's Day Card

I wrote a personal message to my Mom in Word and printed it on a 4 inch circle and adhered it to the inside of the card. I then punched out more fronds and adhered them with a Zig 2-Way glue pen. I cut the corresponding envelope in TBBM2 a little larger than the card base because there’s dimension on the card. I cut the envelope out at 4 3/4 inches.

Inside Message

Envelope - TBBM2

The second card is for my Mother-in-law. I used TBBM2 again for the card base and for the mini pizza box. The flower embellishment is very dimensional so I made the pizza box to put the card in. I used the card feature on page 24 at 5 inches. I also used the “Happy Mother’s Day” phrase on page 41 at 5 inches using a pink Cricut Gel Pen. To get it to print on the inside of the card, I rotated the Mother’s Day phrase 180 degrees to print it upside down.

Mother's Day Card  - American Crafts lines

Inside of card

Cricut Gel Pen (Pink) - TBBM2 phrase

The pizza box is cut at 9 inches (page 68). I cut this out in one piece so I used Cricut’s pastel 12×24 cardstock. There is the option to cut sections 1 and 2 and adhere them together for a larger box. I used 1/4 inch Scor-Tape to assemble the box. I decorated the lid with the Mother’s Day phrase layers cut at 2.5 inches (page 41).

TBBM2 - Card and Box

The paper used on the card and on the box’s lid is Dear Lizzy 5th & Frolic. The paper is two sided (green and pink). The paper flower is from Crate Paper’s On Trend. The gold scalloped border on the card face is from Dear Lizzy 5th & Frolic’s Accent and Phrase Sticker book. The glittery alpha stickers (Thickers) are also from 5th & Frolic.

Mini Pizza Box with Card - TBBM2

Mother's Day Card

I’m entering the hummingbird card into the following challenges:

Fantabulous Cricut Challenge (Challenge Me Monday – #159 Mother’s Day – create a Mother’s Day card). Deadline: 7:00 pm (CST) May 12, 2013.

Cardz TV Stamps DT Challenge #29 (“There’s No Other Like My Mother” – make a card, layout or craft project for Mother’s Day!) Deadline: Noon (EST) May 16, 2013.

My Craft Spot Challenge (Monday Post #96 – For Mom – create something special for Mom). Deadline: May 13, 2013.

Happy Mother’s Day to everyone, everywhere! 🙂

Vanessa

Advertisements

“Special Delivery” Anniversary Card

Hello all ~ I made a card for my sister and brother-in-law’s upcoming anniversary. They have an autumn anniversary so I played on the idea of autumn leaves but kept the card’s colors bright and playful to fit any occasion. I love the stamp image on Wild Card so I played on the theme of “Special Delivery for two special people” which is the inside sentiment that I typed in Word. The special delivery design can be seen in the stamp mat, the postal mark I made in Word, and in the miniature envelope filled with autumn leaves. It’s as if the envelope idea is deconstructed – envelope, then postal mark, then stamp. It was fun  playing with these elements to design a card for a special event.

The stamp image on Wild Card is found under the alphabet feature. It normally has an inner cut that reads “stamped with love” but I hid these lines to just get the stamp shape cut at 4.5 inches. I then added a square mat measuring 4 inches which I ran through my printer to print the postal mark. I sewed these two layers together with a zig-zag stitch (this is the second time I’ve sewn a card so it’s not perfect! 🙂 ). I cut the cute envelope at 2.5 inches from Just Because Cards and the leaves are from Potpourri Basket cut at 2 inches (these are originally from Doodlecharms). The card base is 5 inches square so I cut an envelope from Walk in My Garden at 5 inches to mail it to my sister! The leaves are doodled with a fine point black pen and distressed with brown ink. I then embossed them with Cuttlebug folders – D’vine Swirls and Swiss Dots. I added a little bow to the envelope with a glue dot.

I am entering this card into the following challenges:

http://fantabulouscricut.blogspot.com/2012/11/challenge-me-monday-136.html (Fall Harvest – Make a project using Fall leaves) Deadline: Midnight November 11 (MST)

http://cardztv.blogspot.com/2012/11/attitude-of-gratitude-cricut-cardz.html (Attitude of Gratitude – Make a card for Thanksgiving using any cartridge(s), and any colors you’d like) Deadline: Noon November 20 (EST)

“Seeing Spots” FCCB Challenge – Thanksgiving Card

The Fantabulous Cricut Challenge Blog (FCCB) is hosting another challenge this week – Challenge #135 Seeing Spots – make a project featuring polka dots. I decided to make another Thanksgiving card and incorporate polka dots to enter the challenge. The deadline is midnight, November 4th (MT) in case you’re interested in entering! The challenge is listed here: http://fantabulouscricut.blogspot.com/2012/10/challenge-me-monday-135.html.

For this card, I used The Paper Studio’s Natural Botanical stack (Hobby Lobby) and a piece of cream cardstock. I used the Straight from the Nest (SFTN) cartridge for the little tree layers (cut at 3 inches) and Walk in My Garden (WIMG) for the 5 inch square card base (this can also be done by hand with a paper trimmer ~ 10 inch long x 5 inch wide – fold in half). I also used WIMG to cut the square mat layers at 4 & 3/4 and 4 & 1/2 inches. I love using Design Studio to lay out my card designs so cutting squares this way is easier and faster. I also shrunk a WIMG square to measure 2 & 3/4 x 4 & 1/4 inches for the cream mat under the tree.

The polka dots for the FCCB challenge can be seen in the light green polka dotted paper and in the cream cardstock that’s embossed with Cuttlebug’s “Swiss Dots” embossing folder. Even the orange paper on the tree and card base has flowers with dots in the center. And for just a bit more dots, I added tiny pearl embellishments on the upper right! I love the velvet ric rac ribbon from American Crafts. It adds a nice punch of autumn color and texture. The “Bountiful Blessings” sentiment and brown ink are from Stampabilities (Hobby Lobby). I used this same ink to distress the edges of the cream cardstock prior to dry embossing. For additional dimension, I raised the tree up with foam adhesive (Michael’s).

I’m also entering this card in Cardz TV’s “I’m So Thankful” challenge – make a card or project for Thanksgiving. The deadline for this challenge is Thursday, November 8th at Noon (EST). Here is the challenge link for more details: http://cardztv.blogspot.com/2012/11/im-so-thankful-ctv-stamps-dt-challenge.html. One lucky submitter will be randomly drawn for a set of Cardz TV stamps!

And since I just learned about another cool challenge blog, I’m entering a challenge at “Pause Dream Enjoy Challenges”. This week’s challenge is here: http://pausedreamenjoychallenges.blogspot.com/2012/11/ch-44-orange-brown.html. Make anything with orange and brown! I think this card will work! 🙂 The deadline for this challenge is Thursday, November 8th at Noon (EST). A winner will be chosen by random.org for a $10 gift certificate for Dude Time Doodles. It would be fun if you played along!

Thanks for looking!

Vanessa

Summertime Scene

Recently, I checked out the Fantabulous Cricut Challenge Blog thanks to a fellow blog buddy, Arin, at A Piece of Life’s Pie. She has been picked as their new design team member! Congrats Arin! 🙂 Thanks to her blog and kind words, I decided to enter this week’s challenge called ‘BBQ Time’ where you make a project using BBQ or picnic foods. This is the second challenge I have ever entered but it was a lot of fun and made me think outside the box. Since I couldn’t find the usual BBQ foods like a hamburger or hot dog on any of my cartridges, I made a cherry pie set on top of a picnic table. To add some interest, I created a summer setting with a bright blue sky, green grass, and some fluffy clouds.

Cartridges Used:

Clouds ~ Potpourri Basket  ~ 1 inch (bonus shift)

Picnic Table ~ Camp Out ~ 2.5 inches (base, base shift, blackout)

Cherry Pie ~ Just Because Cards ~ 2 inches

‘Enjoy’ sentiment ~ Wild Card ~ 4 inches

Other Details:

I made the red and white checkered “table-cloth” using the “Paint.net” program (a free downloadable) using the fill function (large checker board) in red. I printed it out on regular copy paper and then hand trimmed it. I think it adds a nice splash of color under the cherry pie. For the pie tin, I used a silver gel pen on white cardstock. I also inked around the picnic table’s top layers with brown ink for definition. I added faux stitching around the 4×6 Kraft card base using a white gel pen. Lastly, I used a lot of foam dimensionals to make the card pop.

Thanks for checking it out!

Vanessa