Summer Bouquet of Spiral Roses

Here’s another paper bouquet, but made with spiral roses this time. I love the fun pops of color and I plan on using it as decor in my craft room. The materials used were all found in my stash – left over from previous crafts. For a wonderful tutorial on cutting spirals and then rolling them to make your own roses, check out Kay at Kay’s Kreative Korner. I used her technique in an earlier post: My First Spiral Rose and Miniature Envelope.

I don’t have a specialized tool to roll flowers so I use a pencil. Sometimes this leaves a big whole in the center if I don’t re-roll tightly by hand. To help fill in the centers of a few roses, I cut out thin strips of paper, rolled them, and then hot glued them to the centers. I played with the colors by combining a pink center to a yellow flower, etc. I love the two-toned look in a single rose. I also used a pair of scallop scissors on three of the spirals to get two different looks. When you’re holding your scissors, you will be able to see how the scallop blade will cut. Holding them one way will give you a positive (rounded) scallop edge and then flipping them over will give you a negative (pointy) edge. The smoother-edged roses were cut with regular scissors.

  • Metal tin, butterfly, styrofoam, 1/8 inch wooden dowels – Hobby Lobby (all left over from a previous bouquet – to stain the dowels green, I used a green ink pad and a sponge dauber)
  • Ribbon scraps, paper grass, umbrella pick – found in my stash
  • Leaves – cut at 4.5 inches from the Wild Card cartridge (left over from a previous bouquet)
  • Hot glue gun – used to assemble the spiral roses and glue them to the leaf-dowels

Thanks for checking it out!

Vanessa

Paper Flower Bouquet with Birthday Card

My lovely mother-in-law is celebrating her 75th birthday! For this special occasion, I wanted to make her a nice keepsake so I made her a paper flower bouquet and a birthday card in pinks, oranges, and greens using my Cricut Expression. I would like to apologize in advance for the long post that is forthcoming below. There are so many details on the bouquet, card, and tag that I want to share with you; but, it’s also for myself so that when I create another one in the future, I can look back and see how I did it! 🙂 Thanks for your interest and patience! LOL

Bouquet

The bouquet flowers were cut using Mother’s Day Bouquet. I cut seven layers of each flower from 3 inches to 1.5 inches (decreasing by a 1/4 inch each time). Here is a chart showing which flowers I used from the cartridge. It also shows how many of each flower were cut and the sizes.

The bright pink container, butterflies, floral styrofoam, spanish moss, 1/8 inch dowels, and sponge daubers to ink the dowels were bought at Hobby Lobby. I had the rest of the supplies in my stash. I used one of my favorite paper pads, Poteeka Soufflé (Paper Studio), for the flowers, along with pastel cardstock from Colorbok (bought at Wal-mart). I used a 1/16 hole punch on the flower centers and secured the layers with small pastel brads. The brads save on glue and you can fluff up and move the layers around as you wish! I also used a pencil to curl the petals down a bit.

The dowels were inked using a green stamp pad and a sponge dauber. I inked the dowels first so that they would have time to dry while I cut out all of my flowers and leaves. There are a total of 22 flowers and 22 leaves but each flower has seven layers. To save time and paper, I cut two types of flowers using one 12×12 sheet of patterned paper. Then repeated the process for two other sets of flowers and another color of paper, and so on.

Some flowers are solid and some are mixed with two colors of paper for variety. I just had fun mixing and matching. Now that I am calculating my total of flowers, I guess I ran my mat through the Expression 11 times to get 22 flowers. I stopped at 22 because that is the lucky number of dowels that fit the styrofoam inside the container. I had inked 30 dowels but couldn’t fit all of them without them hitting each other! So I will save these dowels for a smaller bouquet. Since the dowels are skinny, I was able to snip them to my desired lengths with a wire cutter.

One challenge I faced when starting this project was how to adhere the flowers to the skinny dowels. I wanted the flowers to look “3-D ish” and I was determined to find a way to glue the flowers on top of the dowel and not flat like a candy sucker. Because the dowels are so thin there wasn’t much surface area to secure the flowers to them. I knew I wanted leaves in the bouquet so instead of gluing the leaves to the backs of the flowers, I glued them to the dowel first. This created more area for hot gluing the flowers. Wild Card has a wonderful leaf icon (key #25) that has a cut line in the center which helps you fold the leaf over the end of a dowel. So I cut 22 leaves at 4.5 inches in light green cardstock and then placed a dab of hot glue on the end of each leaf and folded/pinched it around the end of the dowel and held it until it was “set”. Then I hot glued the completed flowers to the leaf/dowel and it worked great!

The bouquet is finished up with light green ribbon, pink and green butterflies, and spanish moss to hide the green styrofoam.

Bouquet Tag

I made a tag marking the special birthday year using the Sweethearts cartridge and Design Studio (DS). The brown layer is 3 inches and the white layer was scaled down to fit on top using DS. I hid the contour lines for both tag holes prior to cutting. Once the tags were cut, I inked the white layer with brown ink and glued it down to the brown base. The tag comes with a corresponding heart-shaped tag enforcer. I cut this at 3 inches, adhered it with my Zig 2-Way glue pen, and then lined up my 1/8 hole punch over the hole in the heart to punch through the layers of tag. The word “Happy” is from Straight from the Nest, the numbers are from Storybook, the “th” letters are from Wild Card, and the ladybug is from Walk in My Garden. The ring securing the tag is a fun, circular paper clip.

Card

All of the cuts for the card are from Straight from the Nest (SFTN) except the numbers “75” which are from Wild Card. I love the cute banner which was cut at 1.5 inches. I used a 1/16 hole punch and mini brads to string the banner along the corner. I used Poteeka Soufflé  paper on the card to match the bouquet. I inked the edges of the light blue mat with brown ink. I’m really liking this inking technique. 🙂 I used a white gel pen to add some cute dots to the images. The card is 5×7 and I cut out an appropriate sized envelope using Just Because Cards. I added another banner to the envelope and hand wrote “MOM” with a fine tip marker.

Whew! That’s a lot of words for one post. I hope you stayed with me until the end. 🙂 Thanks for checking it out!

~Vanessa